{"id":943,"date":"2017-09-30T19:40:13","date_gmt":"2017-09-30T09:40:13","guid":{"rendered":"http:\/\/leederville.net\/rocket\/?p=943"},"modified":"2017-09-30T19:40:13","modified_gmt":"2017-09-30T09:40:13","slug":"gluing-on-the-retainer-top-the-motor-mount","status":"publish","type":"post","link":"https:\/\/leederville.net\/rocket\/index.php\/2017\/09\/30\/gluing-on-the-retainer-top-the-motor-mount\/","title":{"rendered":"Gluing on the Retainer top the Motor Mount"},"content":{"rendered":"

Next step was to glue the Motor retainer on using JB-Weld.<\/p>\n

We followed the steps that were on the AeroPak TailCone. The last two in the screenshot below.<\/p>\n

 <\/p>\n

\"Instructions<\/a>
Instructions to install retainer.<\/figcaption><\/figure>\n

 <\/p>\n

We needed to use Acetone to clear the internal threads of the retainer component we wish to epoxy to the Motor mount.<\/p>\n

\"Acetone<\/a>
Acetone used to clean internal thread of retainer<\/figcaption><\/figure>\n

 <\/p>\n

\"Cleaning<\/a>
Cleaning thread of Retainer<\/figcaption><\/figure>\n

Once clean, we make up a generous amount of JB-Weld and mix thoroughly.<\/p>\n

\"Making<\/a>
Making up batch of JB-Weld for retainer.<\/figcaption><\/figure>\n

 <\/p>\n

\"Creating<\/a>
Creating a nice thin film of JB-Weld. Getting it into the grooves.<\/figcaption><\/figure>\n

 <\/p>\n

Once done, we add a generous amount of JB-Weld to the motor mount, making sure to keep it to the area that the retainer is going to slide up to.<\/p>\n

\"Getting<\/a>
Getting good coverage of JB-Weld over the Motor Mount.<\/figcaption><\/figure>\n

Then I slid the adapter on. As I slid it on, I turned it around a little, back and forward, in and out to ensure that the JB-Weld Epoxy made good contact.<\/p>\n

 <\/p>\n

\"Cleaning<\/a>
Cleaning off excess JB-Weld<\/figcaption><\/figure>\n

I removed excess JB-Weld inside and outside using paper towel and Acetone.<\/p>\n

 <\/p>\n

\"Cleaning<\/a>
Cleaning off excess JB-Weld<\/figcaption><\/figure>\n

I checked all around the rocket to see if there was any stray JB-Weld. I made sure that the adapter was butt up against the Motor Mount.<\/p>\n

\"Checking<\/a>
Checking for any JB-Weld to clean off<\/figcaption><\/figure>\n

I left it overnight to dry.<\/p>\n","protected":false},"excerpt":{"rendered":"

Next step was to glue the Motor retainer on using JB-Weld. We followed the steps that were on the AeroPak TailCone. The last two in the screenshot below.     We needed to use Acetone to clear the internal threads of the retainer component we wish to epoxy to the Motor mount.   Once clean, … Continue reading Gluing on the Retainer top the Motor Mount<\/span> →<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[5,15],"tags":[],"_links":{"self":[{"href":"https:\/\/leederville.net\/rocket\/index.php\/wp-json\/wp\/v2\/posts\/943"}],"collection":[{"href":"https:\/\/leederville.net\/rocket\/index.php\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/leederville.net\/rocket\/index.php\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/leederville.net\/rocket\/index.php\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/leederville.net\/rocket\/index.php\/wp-json\/wp\/v2\/comments?post=943"}],"version-history":[{"count":9,"href":"https:\/\/leederville.net\/rocket\/index.php\/wp-json\/wp\/v2\/posts\/943\/revisions"}],"predecessor-version":[{"id":952,"href":"https:\/\/leederville.net\/rocket\/index.php\/wp-json\/wp\/v2\/posts\/943\/revisions\/952"}],"wp:attachment":[{"href":"https:\/\/leederville.net\/rocket\/index.php\/wp-json\/wp\/v2\/media?parent=943"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/leederville.net\/rocket\/index.php\/wp-json\/wp\/v2\/categories?post=943"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/leederville.net\/rocket\/index.php\/wp-json\/wp\/v2\/tags?post=943"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}